simon
/
mysensors
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Added Nodemanger to temp_hum_sensor

This commit is contained in:
Simon 2017-06-02 22:35:18 +02:00
parent a495f9a520
commit 525d8a323e
16 changed files with 8914 additions and 575 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2627
libraries/NodeManager/NodeManager.cpp Normal file
View File

File diff suppressed because it is too large Load Diff

1075
libraries/NodeManager/NodeManager.h Normal file
View File

File diff suppressed because it is too large Load Diff

76
libraries/NodeManager/NodeManager.ino Normal file
View File

@ -0,0 +1,76 @@
/*
NodeManager is intended to take care on your behalf of all those common tasks a MySensors node has to accomplish, speeding up the development cycle of your projects.
NodeManager includes the following main components:
- Sleep manager: allows managing automatically the complexity behind battery-powered sensors spending most of their time sleeping
- Power manager: allows powering on your sensors only while the node is awake
- Battery manager: provides common functionalities to read and report the battery level
- Remote configuration: allows configuring remotely the node without the need to have physical access to it
- Built-in personalities: for the most common sensors, provide embedded code so to allow their configuration with a single line
Documentation available on: https://github.com/mysensors/NodeManager
*/
// load user settings
#include "config.h"
// include supporting libraries
#ifdef MY_GATEWAY_ESP8266
#include <ESP8266WiFi.h>
#endif
// load MySensors library
#include <MySensors.h>
// load NodeManager library
#include "NodeManager.h"
// create a NodeManager instance
NodeManager nodeManager;
// before
void before() {
// setup the serial port baud rate
Serial.begin(MY_BAUD_RATE);
/*
* Register below your sensors
*/
/*
* Register above your sensors
*/
nodeManager.before();
}
// presentation
void presentation() {
// call NodeManager presentation routine
nodeManager.presentation();
}
// setup
void setup() {
// call NodeManager setup routine
nodeManager.setup();
}
// loop
void loop() {
// call NodeManager loop routine
nodeManager.loop();
}
// receive
void receive(const MyMessage &message) {
// call NodeManager receive routine
nodeManager.receive(message);
}
// receiveTime
void receiveTime(unsigned long ts) {
// call NodeManager receiveTime routine
nodeManager.receiveTime(ts);
}

1100
libraries/NodeManager/README.md Normal file
View File

File diff suppressed because it is too large Load Diff

134
libraries/NodeManager/config.h Normal file
View File

@ -0,0 +1,134 @@
#ifndef config_h
#define config_h
/**********************************
* Sketch configuration
*/
#define SKETCH_NAME "NodeManager"
#define SKETCH_VERSION "1.0"
/**********************************
* MySensors node configuration
*/
// General settings
#define MY_BAUD_RATE 9600
//#define MY_DEBUG
//#define MY_NODE_ID 100
// NRF24 radio settings
#define MY_RADIO_NRF24
//#define MY_RF24_ENABLE_ENCRYPTION
//#define MY_RF24_CHANNEL 76
//#define MY_RF24_PA_LEVEL RF24_PA_HIGH
//#define MY_DEBUG_VERBOSE_RF24
// RFM69 radio settings
//#define MY_RADIO_RFM69
//#define MY_RFM69_FREQUENCY RF69_868MHZ
//#define MY_IS_RFM69HW
//#define MY_DEBUG_VERBOSE_RFM69
//#define MY_RFM69_NEW_DRIVER
//#define MY_RFM69_ENABLE_ENCRYPTION
//#define MY_RFM69_NETWORKID 100
//#define MY_RF69_IRQ_PIN D1
//#define MY_RF69_IRQ_NUM MY_RF69_IRQ_PIN
//#define MY_RF69_SPI_CS D2
/**********************************
* MySensors gateway configuration
*/
// Common gateway settings
//#define MY_REPEATER_FEATURE
// Serial gateway settings
//#define MY_GATEWAY_SERIAL
// Ethernet gateway settings
//#define MY_GATEWAY_W5100
// ESP8266 gateway settings
//#define MY_GATEWAY_ESP8266
//#define MY_ESP8266_SSID ""
//#define MY_ESP8266_PASSWORD ""
// Gateway networking settings
//#define MY_IP_ADDRESS 192,168,178,87
//#define MY_IP_GATEWAY_ADDRESS 192,168,178,1
//#define MY_IP_SUBNET_ADDRESS 255,255,255,0
//#define MY_PORT 5003
//#define MY_GATEWAY_MAX_CLIENTS 2
//#define MY_USE_UDP
// Gateway MQTT settings
//#define MY_GATEWAY_MQTT_CLIENT
//#define MY_CONTROLLER_IP_ADDRESS 192, 168, 178, 68
//#define MY_PORT 1883
//#define MY_MQTT_USER "username"
//#define MY_MQTT_PASSWORD "password"
//#define MY_MQTT_CLIENT_ID "mysensors-1"
//#define MY_MQTT_PUBLISH_TOPIC_PREFIX "mygateway1-out"
//#define MY_MQTT_SUBSCRIBE_TOPIC_PREFIX "mygateway1-in"
// Gateway inclusion mode
//#define MY_INCLUSION_MODE_FEATURE
//#define MY_INCLUSION_BUTTON_FEATURE
//#define MY_INCLUSION_MODE_DURATION 60
//#define MY_DEFAULT_LED_BLINK_PERIOD 300
// Gateway Leds settings
//#define MY_DEFAULT_ERR_LED_PIN 4
//#define MY_DEFAULT_RX_LED_PIN 5
//#define MY_DEFAULT_TX_LED_PIN 6
/***********************************
* NodeManager configuration
*/
// if enabled, enable debug messages on serial port
#define DEBUG 1
// if enabled, enable the capability to power on sensors with the arduino's pins to save battery while sleeping
#define POWER_MANAGER 1
// if enabled, will load the battery manager library to allow the battery level to be reported automatically or on demand
#define BATTERY_MANAGER 1
// if enabled, allow modifying the configuration remotely by interacting with the configuration child id
#define REMOTE_CONFIGURATION 1
// if enabled, persist the remote configuration settings on EEPROM
#define PERSIST 0
// if enabled, a battery sensor will be created at BATTERY_CHILD_ID and will report vcc voltage together with the battery level percentage
#define BATTERY_SENSOR 1
// if enabled, send a SLEEPING and AWAKE service messages just before entering and just after leaving a sleep cycle and STARTED when starting/rebooting
#define SERVICE_MESSAGES 0
// Enable this module to use one of the following sensors: SENSOR_ANALOG_INPUT, SENSOR_LDR, SENSOR_THERMISTOR, SENSOR_MQ, SENSOR_ML8511, SENSOR_ACS712, SENSOR_RAIN_GAUGE
#define MODULE_ANALOG_INPUT 1
// Enable this module to use one of the following sensors: SENSOR_DIGITAL_INPUT
#define MODULE_DIGITAL_INPUT 1
// Enable this module to use one of the following sensors: SENSOR_DIGITAL_OUTPUT, SENSOR_RELAY, SENSOR_LATCHING_RELAY
#define MODULE_DIGITAL_OUTPUT 1
// Enable this module to use one of the following sensors: SENSOR_DHT11, SENSOR_DHT22
#define MODULE_DHT 0
// Enable this module to use one of the following sensors: SENSOR_SHT21
#define MODULE_SHT21 0
// Enable this module to use one of the following sensors: SENSOR_SWITCH, SENSOR_DOOR, SENSOR_MOTION
#define MODULE_SWITCH 0
// Enable this module to use one of the following sensors: SENSOR_DS18B20
#define MODULE_DS18B20 0
// Enable this module to use one of the following sensors: SENSOR_BH1750
#define MODULE_BH1750 0
// Enable this module to use one of the following sensors: SENSOR_MLX90614
#define MODULE_MLX90614 0
// Enable this module to use one of the following sensors: SENSOR_BME280
#define MODULE_BME280 0
// Enable this module to use one of the following sensors: SENSOR_SONOFF
#define MODULE_SONOFF 0
// Enable this module to use one of the following sensors: SENSOR_BMP085
#define MODULE_BMP085 0
// Enable this module to use one of the following sensors: SENSOR_HCSR04
#define MODULE_HCSR04 0
// Enable this module to use one of the following sensors: SENSOR_MCP9808
#define MODULE_MCP9808 0
#endif

206
temp_hum_sensor/lib/DHT/DHT.cpp
View File

@ -1,206 +0,0 @@
/******************************************************************
DHT Temperature & Humidity Sensor library for Arduino.
Features:
- Support for DHT11 and DHT22/AM2302/RHT03
- Auto detect sensor model
- Very low memory footprint
- Very small code
http://www.github.com/markruys/arduino-DHT
Written by Mark Ruys, mark@paracas.nl.
BSD license, check license.txt for more information.
All text above must be included in any redistribution.
Datasheets:
- http://www.micro4you.com/files/sensor/DHT11.pdf
- http://www.adafruit.com/datasheets/DHT22.pdf
- http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/Weather/RHT03.pdf
- http://meteobox.tk/files/AM2302.pdf
Changelog:
2013-06-10: Initial version
2013-06-12: Refactored code
2013-07-01: Add a resetTimer method
******************************************************************/
#include "DHT.h"
void DHT::setup(uint8_t pin, DHT_MODEL_t model)
{
DHT::pin = pin;
DHT::model = model;
DHT::resetTimer(); // Make sure we do read the sensor in the next readSensor()
if ( model == AUTO_DETECT) {
DHT::model = DHT22;
readSensor();
if ( error == ERROR_TIMEOUT ) {
DHT::model = DHT11;
// Warning: in case we auto detect a DHT11, you should wait at least 1000 msec
// before your first read request. Otherwise you will get a time out error.
}
}
}
void DHT::resetTimer()
{
DHT::lastReadTime = millis() - 3000;
}
float DHT::getHumidity()
{
readSensor();
return humidity;
}
float DHT::getTemperature()
{
readSensor();
return temperature;
}
#ifndef OPTIMIZE_SRAM_SIZE
const char* DHT::getStatusString()
{
switch ( error ) {
case DHT::ERROR_TIMEOUT:
return "TIMEOUT";
case DHT::ERROR_CHECKSUM:
return "CHECKSUM";
default:
return "OK";
}
}
#else
// At the expense of 26 bytes of extra PROGMEM, we save 11 bytes of
// SRAM by using the following method:
prog_char P_OK[] PROGMEM = "OK";
prog_char P_TIMEOUT[] PROGMEM = "TIMEOUT";
prog_char P_CHECKSUM[] PROGMEM = "CHECKSUM";
const char *DHT::getStatusString() {
prog_char *c;
switch ( error ) {
case DHT::ERROR_CHECKSUM:
c = P_CHECKSUM; break;
case DHT::ERROR_TIMEOUT:
c = P_TIMEOUT; break;
default:
c = P_OK; break;
}
static char buffer[9];
strcpy_P(buffer, c);
return buffer;
}
#endif
void DHT::readSensor()
{
// Make sure we don't poll the sensor too often
// - Max sample rate DHT11 is 1 Hz (duty cicle 1000 ms)
// - Max sample rate DHT22 is 0.5 Hz (duty cicle 2000 ms)
unsigned long startTime = millis();
if ( (unsigned long)(startTime - lastReadTime) < (model == DHT11 ? 999L : 1999L) ) {
return;
}
lastReadTime = startTime;
temperature = NAN;
humidity = NAN;
// Request sample
digitalWrite(pin, LOW); // Send start signal
pinMode(pin, OUTPUT);
if ( model == DHT11 ) {
delay(18);
}
else {
// This will fail for a DHT11 - that's how we can detect such a device
delayMicroseconds(800);
}
pinMode(pin, INPUT);
digitalWrite(pin, HIGH); // Switch bus to receive data
// We're going to read 83 edges:
// - First a FALLING, RISING, and FALLING edge for the start bit
// - Then 40 bits: RISING and then a FALLING edge per bit
// To keep our code simple, we accept any HIGH or LOW reading if it's max 85 usecs long
uint16_t rawHumidity = 0;
uint16_t rawTemperature = 0;
uint16_t data = 0;
for ( int8_t i = -3 ; i < 2 * 40; i++ ) {
byte age;
startTime = micros();
do {
age = (unsigned long)(micros() - startTime);
if ( age > 90 ) {
error = ERROR_TIMEOUT;
return;
}
}
while ( digitalRead(pin) == (i & 1) ? HIGH : LOW );
if ( i >= 0 && (i & 1) ) {
// Now we are being fed our 40 bits
data <<= 1;
// A zero max 30 usecs, a one at least 68 usecs.
if ( age > 30 ) {
data |= 1; // we got a one
}
}
switch ( i ) {
case 31:
rawHumidity = data;
break;
case 63:
rawTemperature = data;
data = 0;
break;
}
}
// Verify checksum
if ( (byte)(((byte)rawHumidity) + (rawHumidity >> 8) + ((byte)rawTemperature) + (rawTemperature >> 8)) != data ) {
error = ERROR_CHECKSUM;
return;
}
// Store readings
if ( model == DHT11 ) {
humidity = rawHumidity >> 8;
temperature = rawTemperature >> 8;
}
else {
humidity = rawHumidity * 0.1;
if ( rawTemperature & 0x8000 ) {
rawTemperature = -(int16_t)(rawTemperature & 0x7FFF);
}
temperature = ((int16_t)rawTemperature) * 0.1;
}
error = ERROR_NONE;
}

96
temp_hum_sensor/lib/DHT/DHT.h
View File

@ -1,96 +0,0 @@
/******************************************************************
DHT Temperature & Humidity Sensor library for Arduino.
Features:
- Support for DHT11 and DHT22/AM2302/RHT03
- Auto detect sensor model
- Very low memory footprint
- Very small code
http://www.github.com/markruys/arduino-DHT
Written by Mark Ruys, mark@paracas.nl.
BSD license, check license.txt for more information.
All text above must be included in any redistribution.
Datasheets:
- http://www.micro4you.com/files/sensor/DHT11.pdf
- http://www.adafruit.com/datasheets/DHT22.pdf
- http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/Weather/RHT03.pdf
- http://meteobox.tk/files/AM2302.pdf
Changelog:
2013-06-10: Initial version
2013-06-12: Refactored code
2013-07-01: Add a resetTimer method
******************************************************************/
#ifndef dht_h
#define dht_h
#if ARDUINO < 100
#include <WProgram.h>
#else
#include <Arduino.h>
#endif
class DHT
{
public:
typedef enum {
AUTO_DETECT,
DHT11,
DHT22,
AM2302, // Packaged DHT22
RHT03 // Equivalent to DHT22
}
DHT_MODEL_t;
typedef enum {
ERROR_NONE = 0,
ERROR_TIMEOUT,
ERROR_CHECKSUM
}
DHT_ERROR_t;
void setup(uint8_t pin, DHT_MODEL_t model=AUTO_DETECT);
void resetTimer();
float getTemperature();
float getHumidity();
DHT_ERROR_t getStatus() { return error; };
const char* getStatusString();
DHT_MODEL_t getModel() { return model; }
int getMinimumSamplingPeriod() { return model == DHT11 ? 1000 : 2000; }
int8_t getNumberOfDecimalsTemperature() { return model == DHT11 ? 0 : 1; };
int8_t getLowerBoundTemperature() { return model == DHT11 ? 0 : -40; };
int8_t getUpperBoundTemperature() { return model == DHT11 ? 50 : 125; };
int8_t getNumberOfDecimalsHumidity() { return 0; };
int8_t getLowerBoundHumidity() { return model == DHT11 ? 20 : 0; };
int8_t getUpperBoundHumidity() { return model == DHT11 ? 90 : 100; };
static float toFahrenheit(float fromCelcius) { return 1.8 * fromCelcius + 32.0; };
static float toCelsius(float fromFahrenheit) { return (fromFahrenheit - 32.0) / 1.8; };
protected:
void readSensor();
float temperature;
float humidity;
uint8_t pin;
private:
DHT_MODEL_t model;
DHT_ERROR_t error;
unsigned long lastReadTime;
};
#endif /*dht_h*/

49
temp_hum_sensor/lib/DHT/README.md
View File

@ -1,49 +0,0 @@
DHT
===
An Arduino library for reading the DHT family of temperature and humidity sensors.
Written by Mark Ruys, <mark@paracas.nl>.
Features
--------
- Support for DHT11 and DHT22, AM2302, RHT03
- Auto detect sensor model
- Low memory footprint
- Very small code
Usage
-----
```
#include "DHT.h"
DHT dht;
void setup()
{
Serial.begin(9600);
dht.setup(2); // data pin 2
}
void loop()
{
delay(dht.getMinimumSamplingPeriod());
Serial.print(dht.getHumidity());
Serial.print("\t");
Serial.print(dht.getTemperature());
}
```
Also check out the [example] how to read out your sensor. For all the options, see [dht.h][header].
Installation
------------
Place the [DHT][download] library folder in your `<arduinosketchfolder>/libraries/` folder. You may need to create the `libraries` subfolder if its your first library. Restart the Arduino IDE.
[download]: https://github.com/markruys/arduino-DHT/archive/master.zip "Download DHT library"
[example]: https://github.com/markruys/arduino-DHT/blob/master/examples/DHT_Test/DHT_Test.pde "Show DHT example"
[header]: https://github.com/markruys/arduino-DHT/blob/master/DHT.h "Show header file"

29
temp_hum_sensor/lib/DHT/examples/DHT_Test/DHT_Test.pde
View File

@ -1,29 +0,0 @@
#include "DHT.h"
DHT dht;
void setup()
{
Serial.begin(9600);
Serial.println();
Serial.println("Status\tHumidity (%)\tTemperature (C)\t(F)");
dht.setup(2); // data pin 2
}
void loop()
{
delay(dht.getMinimumSamplingPeriod());
float humidity = dht.getHumidity();
float temperature = dht.getTemperature();
Serial.print(dht.getStatusString());
Serial.print("\t");
Serial.print(humidity, 1);
Serial.print("\t\t");
Serial.print(temperature, 1);
Serial.print("\t\t");
Serial.println(dht.toFahrenheit(temperature), 1);
}

42
temp_hum_sensor/lib/DHT/keywords.txt
View File

@ -1,42 +0,0 @@
#######################################
# Syntax Coloring Map For DHT
#######################################
#######################################
# Datatypes (KEYWORD1)
#######################################
DHT KEYWORD1
#######################################
# Methods and Functions (KEYWORD2)
#######################################
setup KEYWORD2
getTemperature KEYWORD2
getHumidity KEYWORD2
getStatus KEYWORD2
getStatusString KEYWORD2
getModel KEYWORD2
getMinimumSamplingPeriod KEYWORD2
toFahrenheit KEYWORD2
toCelsius KEYWORD2
#######################################
# Instances (KEYWORD2)
#######################################
#######################################
# Constants (LITERAL1)
#######################################
AUTO_DETECT LITERAL1
DHT11 LITERAL1
DHT22 LITERAL1
AM2302 LITERAL1
RHT03 LITERAL1
ERROR_NONE LITERAL1
ERROR_TIMEOUT LITERAL1
ERROR_CHECKSUM LITERAL1

26
temp_hum_sensor/lib/DHT/license.txt
View File

@ -1,26 +0,0 @@
Software License Agreement (BSD License)
Copyright (c) 2013, Mark Ruys. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
* Neither the name of the University of California, Berkeley nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE REGENTS AND CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

BIN
temp_hum_sensor/lib/DHT/readme.pdf
View File

Binary file not shown.

2627
temp_hum_sensor/src/NodeManager.cpp Normal file
View File

File diff suppressed because it is too large Load Diff

1075
temp_hum_sensor/src/NodeManager.h Normal file
View File

File diff suppressed because it is too large Load Diff

134
temp_hum_sensor/src/config.h Normal file
View File

@ -0,0 +1,134 @@
#ifndef config_h
#define config_h
/**********************************
* Sketch configuration
*/
#define SKETCH_NAME "NodeManager"
#define SKETCH_VERSION "1.0"
/**********************************
* MySensors node configuration
*/
// General settings
#define MY_BAUD_RATE 9600
//#define MY_DEBUG
//#define MY_NODE_ID 100
// NRF24 radio settings
#define MY_RADIO_NRF24
//#define MY_RF24_ENABLE_ENCRYPTION
//#define MY_RF24_CHANNEL 76
//#define MY_RF24_PA_LEVEL RF24_PA_HIGH
//#define MY_DEBUG_VERBOSE_RF24
// RFM69 radio settings
//#define MY_RADIO_RFM69
//#define MY_RFM69_FREQUENCY RF69_868MHZ
//#define MY_IS_RFM69HW
//#define MY_DEBUG_VERBOSE_RFM69
//#define MY_RFM69_NEW_DRIVER
//#define MY_RFM69_ENABLE_ENCRYPTION
//#define MY_RFM69_NETWORKID 100
//#define MY_RF69_IRQ_PIN D1
//#define MY_RF69_IRQ_NUM MY_RF69_IRQ_PIN
//#define MY_RF69_SPI_CS D2
/**********************************
* MySensors gateway configuration
*/
// Common gateway settings
//#define MY_REPEATER_FEATURE
// Serial gateway settings
//#define MY_GATEWAY_SERIAL
// Ethernet gateway settings
//#define MY_GATEWAY_W5100
// ESP8266 gateway settings
//#define MY_GATEWAY_ESP8266
//#define MY_ESP8266_SSID ""
//#define MY_ESP8266_PASSWORD ""
// Gateway networking settings
//#define MY_IP_ADDRESS 192,168,178,87
//#define MY_IP_GATEWAY_ADDRESS 192,168,178,1
//#define MY_IP_SUBNET_ADDRESS 255,255,255,0
//#define MY_PORT 5003
//#define MY_GATEWAY_MAX_CLIENTS 2
//#define MY_USE_UDP
// Gateway MQTT settings
//#define MY_GATEWAY_MQTT_CLIENT
//#define MY_CONTROLLER_IP_ADDRESS 192, 168, 178, 68
//#define MY_PORT 1883
//#define MY_MQTT_USER "username"
//#define MY_MQTT_PASSWORD "password"
//#define MY_MQTT_CLIENT_ID "mysensors-1"
//#define MY_MQTT_PUBLISH_TOPIC_PREFIX "mygateway1-out"
//#define MY_MQTT_SUBSCRIBE_TOPIC_PREFIX "mygateway1-in"
// Gateway inclusion mode
//#define MY_INCLUSION_MODE_FEATURE
//#define MY_INCLUSION_BUTTON_FEATURE
//#define MY_INCLUSION_MODE_DURATION 60
//#define MY_DEFAULT_LED_BLINK_PERIOD 300
// Gateway Leds settings
//#define MY_DEFAULT_ERR_LED_PIN 4
//#define MY_DEFAULT_RX_LED_PIN 5
//#define MY_DEFAULT_TX_LED_PIN 6
/***********************************
* NodeManager configuration
*/
// if enabled, enable debug messages on serial port
#define DEBUG 1
// if enabled, enable the capability to power on sensors with the arduino's pins to save battery while sleeping
#define POWER_MANAGER 1
// if enabled, will load the battery manager library to allow the battery level to be reported automatically or on demand
#define BATTERY_MANAGER 1
// if enabled, allow modifying the configuration remotely by interacting with the configuration child id
#define REMOTE_CONFIGURATION 1
// if enabled, persist the remote configuration settings on EEPROM
#define PERSIST 1
// if enabled, a battery sensor will be created at BATTERY_CHILD_ID and will report vcc voltage together with the battery level percentage
#define BATTERY_SENSOR 1
// if enabled, send a SLEEPING and AWAKE service messages just before entering and just after leaving a sleep cycle and STARTED when starting/rebooting
#define SERVICE_MESSAGES 0
// Enable this module to use one of the following sensors: SENSOR_ANALOG_INPUT, SENSOR_LDR, SENSOR_THERMISTOR, SENSOR_MQ, SENSOR_ML8511, SENSOR_ACS712, SENSOR_RAIN_GAUGE
#define MODULE_ANALOG_INPUT 0
// Enable this module to use one of the following sensors: SENSOR_DIGITAL_INPUT
#define MODULE_DIGITAL_INPUT 0
// Enable this module to use one of the following sensors: SENSOR_DIGITAL_OUTPUT, SENSOR_RELAY, SENSOR_LATCHING_RELAY
#define MODULE_DIGITAL_OUTPUT 0
// Enable this module to use one of the following sensors: SENSOR_DHT11, SENSOR_DHT22
#define MODULE_DHT 1
// Enable this module to use one of the following sensors: SENSOR_SHT21
#define MODULE_SHT21 0
// Enable this module to use one of the following sensors: SENSOR_SWITCH, SENSOR_DOOR, SENSOR_MOTION
#define MODULE_SWITCH 0
// Enable this module to use one of the following sensors: SENSOR_DS18B20
#define MODULE_DS18B20 0
// Enable this module to use one of the following sensors: SENSOR_BH1750
#define MODULE_BH1750 0
// Enable this module to use one of the following sensors: SENSOR_MLX90614
#define MODULE_MLX90614 0
// Enable this module to use one of the following sensors: SENSOR_BME280
#define MODULE_BME280 0
// Enable this module to use one of the following sensors: SENSOR_SONOFF
#define MODULE_SONOFF 0
// Enable this module to use one of the following sensors: SENSOR_BMP085
#define MODULE_BMP085 0
// Enable this module to use one of the following sensors: SENSOR_HCSR04
#define MODULE_HCSR04 0
// Enable this module to use one of the following sensors: SENSOR_MCP9808
#define MODULE_MCP9808 0
#endif

193
temp_hum_sensor/src/temp_hum_sensor.ino
View File

@ -1,142 +1,81 @@
/** /*
* The MySensors Arduino library handles the wireless radio link and protocol NodeManager is intended to take care on your behalf of all those common tasks a MySensors node has to accomplish, speeding up the development cycle of your projects.
* between your home built sensors/actuators and HA controller of choice.
* The sensors forms a self healing radio network with optional repeaters. Each NodeManager includes the following main components:
* repeater and gateway builds a routing tables in EEPROM which keeps track of the - Sleep manager: allows managing automatically the complexity behind battery-powered sensors spending most of their time sleeping
* network topology allowing messages to be routed to nodes. - Power manager: allows powering on your sensors only while the node is awake
* - Battery manager: provides common functionalities to read and report the battery level
* Created by Henrik Ekblad <henrik.ekblad@mysensors.org> - Remote configuration: allows configuring remotely the node without the need to have physical access to it
* Copyright (C) 2013-2015 Sensnology AB - Built-in personalities: for the most common sensors, provide embedded code so to allow their configuration with a single line
* Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
* Documentation available on: https://github.com/mysensors/NodeManager
* Documentation: http://www.mysensors.org
* Support Forum: http://forum.mysensors.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
*******************************
*
* REVISION HISTORY
* Version 1.0 - Henrik EKblad
*
* DESCRIPTION
* This sketch provides an example how to implement a humidity/temperature
* sensor using DHT11/DHT-22
* http://www.mysensors.org/build/humidity
*/ */
// Enable debug prints
#define MY_DEBUG
// Enable and select radio type attached // load user settings
#define MY_RADIO_NRF24 #include "config.h"
#define MY_RF24_PA_LEVEL RF24_PA_LOW // include supporting libraries
#if F_CPU == 8000000L #ifdef MY_GATEWAY_ESP8266
#define MY_BAUD_RATE 38400 #include <ESP8266WiFi.h>
#endif #endif
// load MySensors library
#define MY_GATEWAY_SERIAL
//#define MY_RADIO_RFM69
#include <SPI.h>
#include <MySensors.h> #include <MySensors.h>
#include <DHT.h> // load NodeManager library
#define MY_NODE_ID 10 #include "NodeManager.h"
#define MY_PARENT_NODE_ID 0
#define CHILD_ID_HUM 0
#define CHILD_ID_TEMP 1
#define DHT_DATA_PIN 3
static const uint64_t UPDATE_INTERVAL = 6000; // create a NodeManager instance
static const uint8_t FORCE_UPDATE_N_READS = 10; NodeManager nodeManager;
DHT dht; // before
float lastTemp; void before() {
float lastHum; // setup the serial port baud rate
boolean metric = true; Serial.begin(MY_BAUD_RATE);
/*
* Register below your sensors
*/
nodeManager.setSleep(SLEEP,10,MINUTES);
nodeManager.setBatteryMin(1.8);
nodeManager.setBatteryMax(2.4);
nodeManager.setBatteryInternalVcc(true);
nodeManager.setBatteryPin(A0);
uint8_t nNoUpdatesTemp; nodeManager.registerSensor(SENSOR_DHT11, 3);
uint8_t nNoUpdatesHum;
MyMessage msgHum(CHILD_ID_HUM, V_HUM); /*
MyMessage msgTemp(CHILD_ID_TEMP, V_TEMP); * Register above your sensors
*/
void setup() nodeManager.before();
{
dht.setup(DHT_DATA_PIN);
metric = getConfig().isMetric;
if (UPDATE_INTERVAL <= dht.getMinimumSamplingPeriod()) {
Serial.println("Warning: UPDATE_INTERVAL is smaller than supported by the sensor!");
}
MY_SERIALDEVICE.println(__FILE__);
MY_SERIALDEVICE.println(MYSENSORS_LIBRARY_VERSION);
MY_SERIALDEVICE.println(hwFreeMem());
MY_SERIALDEVICE.println(hwCPUVoltage());
MY_SERIALDEVICE.println(hwCPUFrequency());
MY_SERIALDEVICE.println(F_CPU);
MY_SERIALDEVICE.println(F("**********"));
sleep(dht.getMinimumSamplingPeriod());
} }
void presentation() // presentation
{ void presentation() {
// Send the Sketch Version Information to the Gateway // call NodeManager presentation routine
sendSketchInfo("Humidity", "1.0"); nodeManager.presentation();
}
// Register all sensors to gw (they will be created as child devices) // setup
present(CHILD_ID_HUM, S_HUM); void setup() {
present(CHILD_ID_TEMP, S_TEMP); // call NodeManager setup routine
nodeManager.setup();
}
// loop
void loop() {
// call NodeManager loop routine
nodeManager.loop();
}
// receive
void receive(const MyMessage &message) {
// call NodeManager receive routine
nodeManager.receive(message);
}
// receiveTime
void receiveTime(unsigned long ts) {
// call NodeManager receiveTime routine
nodeManager.receiveTime(ts);
} }
void loop()
{
delay(dht.getMinimumSamplingPeriod());
float temperature = dht.getTemperature();
if (isnan(temperature)) {
Serial.println("Failed reading temperature from DHT");
} else if (temperature != lastTemp ||
nNoUpdatesTemp == FORCE_UPDATE_N_READS) {
lastTemp = temperature;
if (!metric) {
temperature = dht.toFahrenheit(temperature);
}
nNoUpdatesTemp = 0;
send(msgTemp.set(temperature, 1));
#ifdef MYDEBUG
Serial.print("T: ");
Serial.println(temperature);
#endif
} else {
// Increase no update counter if the temperature stayed the same
nNoUpdatesTemp++;
}
float humidity = dht.getHumidity();
if (isnan(humidity)) {
Serial.println("Failed reading humidity from DHT");
} else if (humidity != lastHum || nNoUpdatesHum == FORCE_UPDATE_N_READS) {
// Only send humidity if it changed since the last measurement or if we didn't send an update for n times
lastHum = humidity;
// Reset no updates counter
nNoUpdatesHum = 0;
send(msgHum.set(humidity, 1));
#ifdef MY_DEBUG
Serial.print("H: ");
Serial.println(humidity);
#endif
} else {
// Increase no update counter if the humidity stayed the same
nNoUpdatesHum++;
}
sleep(UPDATE_INTERVAL); //sleep a bit
}