simon
/
EmonTH
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

V3.2.2 fix DIP switches not being read when EEPROM is configured

This commit is contained in:
Glyn Hudson 2017-05-12 12:52:49 +01:00
parent d71f5b2dc1
commit 9924b2d0cf
2 changed files with 21 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
firmware/src/src.ino
View File

@ -30,8 +30,9 @@
31 - Special allocation in JeeLib RFM12 driver - Node31 can communicate with nodes on any network group
-------------------------------------------------------------------------------------------------------------
Change log:
V3.2.2 - (12/05/17) Fix DIP switch nodeID not being read when EEPROM is configures
V3.2.1 - (30/11/16) Fix emonTx port typo
V3.2.0 - (13/11/16) run-time serial nodeID config
V3.2.0 - (13/11/16) Run-time serial nodeID config
V3.1.0 - (19/10/16) Test for RFM69CW and SI7201 at startup, allow serial use without RF prescent
V3.0.0 - (xx/10/16) Add support for SI7021 sensor instead of DHT22 (emonTH V2.0 hardware)
^^^ emonTH V2.0 hardware ^^^
@ -62,7 +63,7 @@
boolean debug=1; // Set to 1 to few debug serial output
boolean flash_led=0; // Flash LED after each sample (battery drain) default=0
const byte version = 32; // firmware version divided by 10 e,g 16 = V1.6
const byte version = 322; // firmware version divided by 10 e,g 16 = V1.6
// These variables control the transmit timing of the emonTH
const unsigned long WDT_PERIOD = 80; // mseconds.
const unsigned long WDT_MAX_NUMBER = 690; // Data sent after WDT_MAX_NUMBER periods of WDT_PERIOD ms without pulses:
@ -171,10 +172,6 @@ void setup() {
boolean DIP1 = digitalRead(DIP_switch1);
boolean DIP2 = digitalRead(DIP_switch2);
if ((DIP1 == HIGH) && (DIP2 == HIGH)) nodeID=nodeID;
if ((DIP1 == LOW) && (DIP2 == HIGH)) nodeID=nodeID+1;
if ((DIP1 == HIGH) && (DIP2 == LOW)) nodeID=nodeID+2;
if ((DIP1 == LOW) && (DIP2 == LOW)) nodeID=nodeID+3;
if (debug==1)
{
@ -204,6 +201,12 @@ void setup() {
if (debug) Serial.println("Int RFM...");
rf12_initialize(nodeID, RF_freq, networkGroup); // Initialize RFM
// Add effect of DIP switch positions to nodeID
if ((DIP1 == HIGH) && (DIP2 == HIGH)) nodeID=nodeID;
if ((DIP1 == LOW) && (DIP2 == HIGH)) nodeID=nodeID+1;
if ((DIP1 == HIGH) && (DIP2 == LOW)) nodeID=nodeID+2;
if ((DIP1 == LOW) && (DIP2 == LOW)) nodeID=nodeID+3;
if (debug){
Serial.println("RFM Started");
Serial.print("Node: ");