simon
/
EmonTH
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Update src.ino

This commit is contained in:
Gwil Noble 2017-12-05 10:58:59 +00:00 committed by GitHub
parent 9812cc3138
commit 05fa2c98f6
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 4 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
firmware/src/src.ino
View File

@ -1,7 +1,7 @@
/*
emonTH V2 Low Power SI7021 Humidity & Temperature, DS18B20 Temperature & Pulse counting Node Example
Si7201 = internal temperature & Humidity
Si7021 = internal temperature & Humidity
DS18B20 = External temperature
@ -34,7 +34,7 @@
V3.2.2 - (12/05/17) Fix DIP switch nodeID not being read when EEPROM is configures
V3.2.1 - (30/11/16) Fix emonTx port typo
V3.2.0 - (13/11/16) Run-time serial nodeID config
V3.1.0 - (19/10/16) Test for RFM69CW and SI7201 at startup, allow serial use without RF prescent
V3.1.0 - (19/10/16) Test for RFM69CW and SI7021 at startup, allow serial use without RF prescent
V3.0.0 - (xx/10/16) Add support for SI7021 sensor instead of DHT22 (emonTH V2.0 hardware)
^^^ emonTH V2.0 hardware ^^^
V2.7 - (15/09/16) Serial print serial pairs for emonesp compatiable e.g. temp:210,humidity:56
@ -240,7 +240,7 @@ void setup() {
//################################################################################################################################
// Setup and for presence of si7201
//################################################################################################################################
if (debug==1) Serial.println("Int SI7201..");
if (debug==1) Serial.println("Int SI7021..");
// check if the I2C lines are HIGH
if (digitalRead(SDA) == HIGH || digitalRead(SCL) == HIGH)
@ -394,7 +394,7 @@ void loop()
// See more https://community.openenergymonitor.org/t/emonth-battery-measurement-accuracy/1317
//emonth.battery=int(analogRead(BATT_ADC)*3.222);
// Read SI7201
// Read SI7021
// Read from SI7021 SPI temp & humidity sensor
if (SI7021_status==1){
power_twi_enable();